- PAPANIKOLI 1A – 1077 – NICOSIA – CYPRUS
- 0035722000125
- This email address is being protected from spambots. You need JavaScript enabled to view it.
The router for households or small companies with the designation hAP ax3 or C53UiG+5HPaxD2HPaxD has an L6 license, desktop design and includes 5 Gigabit ports of which the 1st port supports both PoE in and PoE out and even 2.5 Gigabit ethernet. In addition, the router has two radio parts supporting 802.11a/b/g/n/ac/ax standards allowing simultaneous operation in both bands and two removable omnidirectional antennas. In the 2.4GHz band, 2×2 MIMO with a transfer rate of up to 574 Mbps and in the 5 GHz band 2×2 MIMO with a transfer rate of 1200 Mbps are supported. The gain of two removable wireless antennas is 3.3 dBi (2.4 GHz) and 5.5 dBi (5 GHz).
To sum things up - hAP ax³ is among the fastest, safest, and most powerful choices in the home access point world. Wired or wireless. And it comes with the most advanced networking software on the market – RouterOS. Unlike many other vendors, we don’t limit what you can do. There are no paywalls or confusing subscriptions. All our devices share the same limitless operating system. Imagination is the only limitation.
Some might ask – why do we even need higher wireless speeds? Well, countless use cases have been previously impossible or difficult to pull off. For example, working with large media files over the wireless network – without the need to download and upload everything. Do you really have the time to wait? Grab a hAP ax³ and save more time for the essential things in life.
Warranty (Repair - Replacement) |
12 months |
Specifications | |
CPU | Quad-Core IPQ-6010 1.8 GHz |
CPU architecture | ARM 64bit |
Size of RAM | 1 GB |
Storage | 128 MB, NAND |
Number of 1G Ethernet ports | 4 |
Number of 2.5G Ethernet ports | 1 (supports PoE-in/out) |
USB | 1 USB 3 type A |
Switch chip model | IPQ-6010 |
Wireless interface model | QCN-5022 (2.4 GHz), QCN-5052 (5 GHz) |
Wireless | 2.4 GHz 802.11b/g/n/ax dual-chain, 5 GHz 802.11a/n/ac/ax dual-chain |
Wireless antenna max gain | 2.4 GHz (3.3 dBi), 5 GHz (5.5 dBi) |
Dimensions | 251 x 130 x 39 mm |
Operating system | RouterOS, License level 6 |
Operating temperature | -40°C to +70°C |
Powering | |
Number of DC inputs | 2 (PoE-in, DC jack) |
PoE-in input Voltage | 18-28 V |
DC jack input Voltage | 12-28 V |
PoE-out | Passive PoE Ether1, max out per port output (input < 30 V): 0.625 A |
PoE-out total output power | 15 W |
Power adapter nominal voltage | 24 V |
Power adapter nominal current | 1.5 A |
Max power consumption (without attachments) | 15 W |
Max power consumption | 38 W |
Included parts | • 24 V 1.5 A power adapter • Fastening set • HGO indoor antenna kit • Case base |
Wireless Specifications | ||
Rate (2.4 GHz) | Tx (dBm) | Rx (dBm) |
1MBit/s | 27 | -100 |
11MBit/s | 27 | -94 |
6MBit/s | 29 | -96 |
54MBit/s | 27 | -80 |
MCS0 | 29 | -96 |
MCS7 | 26 | -75 |
MCS9 | 24 | -70 |
MCS11 | 22 | -67 |
Rate (5 GHz) | Tx (dBm) | Rx (dBm) |
6MBit/s | 28 | -96 |
54MBit/s | 26 | -80 |
MCS0 | 28 | -96 |
MCS7 | 25 | -75 |
MCS9 | 23 | -70 |
MCS11 | 20 | -67 |