- PAPANIKOLI 1A – 1077 – NICOSIA – CYPRUS
- 0035722000125
- This email address is being protected from spambots. You need JavaScript enabled to view it.

The Ubiquiti Wave-Pico is a 60 GHz point-to-multipoint (PtMP) client device with built-in 5GHz Wifi 6 (802.11ax) backup radio. Max link range when used with Wave-AP is 1.3 km or 0.9 km when used with Wave-AP-micro. The throughput of the device is 2 Gbps(1 Gbps duplex) and 5 GHz backup can reach up to 800 Mbps. Unit is euiped with 1 Gbps LAN port with PoE 48V DC support. To simplify setup, the device is equipped with integrated Bluetooth to connect to the UISP mobile app or there is an option to setup via web interface.
Key features:
• Range up to 1.3 km when using Wave AP
• Power supply via PoE
• Throughput in the 60 GHz band 2000 Mbps, in the 5 GHz band up to 800 Mbps
• Integrated Bluetooth for setup via the UISP mobile app
* Distance depends on total radiated power, which may vary from country to country
Before putting the link into operation, it must first be registered on the 60ghz.ctu.cz portal in accordance with VO-R/12.
Package contents:
• Device
• Device holder for 20 to 53 mm diameter loops
• Gigabit adapter 48V DC 0.5A
• QuickStart
Caution! According to current Greek Legislation, of N.F.B.A.R. and the provisions of the P.D. 98/2017 the lawful use of this product in the frequency band 5470 – 5725MHz, provides for a maximum transmit power of 100mW e.i.r.p. At this maximum power the output power of the transmitter and the gain of the antenna are both taken into account. Responsible for spectrum surveillance is H.T.P.C. This product is CE marked, P.D. 98/2017 This product is intended for indoor use. |
Warranties | |
Replacement: | |
12 months |
Technical Specifications | |
Dimensions | Ø152.1 x 55.8 mm (Ø6 x 2.2") |
Weight |
|
Enclosure materials | UV stabilized plastic polycarbonate |
Mount material | UV stabilized plastic polycarbonate |
Pole mount diameter | 20 to 53.1 mm (0.8 to 2.1") on pipe outer diameter |
Wind loading | 31.3 N at 200 km/h (7 lbf at 125 mph) |
Weatherproong | IPX6 |
Processor | Dual-core ARM® Cortex® -A53 cores at 1GHz |
Memory | DDR3L 512MB |
Networking interface | (1) GbE RJ45 port |
Max. power consumption | 10W |
Power method |
|
Power supply | 48V DC, 0.5A gigabit PoE adapter (Included) Can be powered by a UISP Router or UISP Switch |
Supported voltage range |
|
GPS | No |
Button | Factory reset |
LEDs | Power, Ethernet, link |
Ambient operating temperature | -40 to 60° C (-40 to 140° F) |
Ambient operating humidity | 5 to 95% noncondensing |
Certifications | FCC, IC, CE |
Operating mode | PtMP station, PtP |
Ubiquiti specific features | Wave AI, discovery protocol |
Services | UISP, ping watchdog, NTP client, SNMP |
Tools | Antenna alignment, discovery utility, ping, trace route, speed test, cable test*, site survey*, traffic shaping** *FW version 3.3.0 and later. **FW version 3.4.0 and later. |
Network | Bridge/Router* mode *Router is available in PtMP station mode only. |
Application requirements |
|
Total throughput | 2 Gbps |
Max. range |
|
Encryption | WPA2-PSK (AES) |
Operating frequency* | 57–71 GHz *Depends on regulatory region. |
Channel bandwidth | 2160, 1080, 540* MHz *FW version 3.3.0 and later. |
Operating channels* |
|
Modulation | 16QAM, QPSK |
Antenna gain | 27.7 dBi |
Polarization | Vertically linear |
Beamwidth |
|
WiFi standard | 802.11ax (WiFi 6) |
Worldwide | 5180 - 5875 MHz *Depends on regulatory region. |
Channel bandwidth | 20, 40, 80 MHz |
Modulation |
|
Antenna gain | 9 dBi |
Polarization | Dual-linear |
Beamwidth |
|
Cross-pol isolation | 15 dB |
Power |
|
Ethernet | Flashing blue: Ethernet traffic detected |
Links |
|