Ubiquiti Wave-Nano UISP Wave Nano

Product Code:

Wave-Nano

Manufacturer: Ubiquiti

Sales price 262,00 €(Includes 19% VAT)

Sales price without tax 220,17 €

Product Availability:

Show Shipping Cost:

Ask a question about this product

« MikroTik wAPG-5HaxD2HaxD, wAP ax, Access Point Ubiquiti NSM2 NanoStation 2,4GHz 11dBi airMAX MIMO Outdoor AP-CPE »

Description
Specifications
Downloads

Ubiquiti Wave-Nano UISP Wave Nano

• 5 GHz backup radio
• Link range: up to 5 km
• Router mode support
• Integrated GPS antenna
• Link planning support via ISP Design Center

60 GHz PtMP station powered by Wave Technology.Can connect to a Wave AP and deliver 2 Gbps total throughput (1 Gbps duplex). The Wave Nano is equipped with a high-performance 5GHz backup radio to ensure uninterrupted connection and a Bluetooth radio to simplify setup via the UISP Mobile app.

Warranty (Repair - Replacement)

24 months

Technical Specifications
Dimensions	Ø256.5 x 113.5 mm (Ø10.1 x 4.5")
Weight	Without mount:932 g (2.1 lb) With mount:1.2 kg (2.6 lb)
Enclosure materials	Aluminum alloy, UV stabilized plastic
Mount material	Aluminum alloy, UV stabilized plastic
Pole mount diameter	25 to 63.5 mm (1 to 2.5") on pipe outer diameter
Wind loading	127 N at 200 km/h (28.6 lbf at 125 mph)
Weatherproong	IPX6
Processor	Dual ARM Cortex -A53 cores at 1GHz
Memory	DDR3L 512MB
Networking interface	(1) GbE RJ45 port
Max. power consumption	20W
Power method	Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-) Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only
Power supply	48VDC, 0.65A gigabit PoE adapter (included) Can be powered by a UISP Router or UISP Switch
Supported voltage range	44–54V DC 22–27V DC
GPS	Yes
Button	Factory reset
LEDs	Power, Ethernet, GPS, link
Ambient operating temperature	-40 to 60° C (-40 to 140° F)
Ambient operating humidity	5 to 95% noncondensing
Certifications	FCC, IC, CE
Operating mode	PtMP station, PtP* *FW version 3.2.0 and later.
Ubiquiti specific features	Wave AI, discovery protocol
Services	UISP, ping watchdog, NTP client, SNMP
Tools	Antenna alignment, discovery utility, ping, trace route, speed test, cable test, site survey, traffic shaping** FW version 3.3.0 and later. *FW version 3.4.0 and later.
Network	Bridge/Router* mode *Router is available in PtMP station mode only.
Application requirements	UISP: Version 1.4.5 and later
Total throughput	2 Gbps
Max. range	5+ km
Encryption	WPA2-PSK (AES)
Operating frequency*	57 to 71 GHz *Depends onregulatory region
Channel bandwidth	2160, 1080, 540* MHz *FW version 3.3.0 and later.
Operating channels*	58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz *Depends onregulatory region
Modulation	16QAM, QPSK
Antenna gain	41 dBi
Polarization	Vertically linear
Beamwidth	Azimuth: 3 dB 1.4° Elevation: 3 dB 1.4°
WiFi standard	802.11ax (WiFi 6)
Worldwide	5150 - 5875 MHz *Depends on regulatory region.
Channel bandwidth	20, 40, 80 MHz
Modulation	BPSK (1⁄2), QPSK (1⁄2), QPSK (3⁄4), 16QAM (1⁄2), 16QAM (3⁄4), 64QAM (2⁄3), 64QAM (3⁄4), 64QAM (5⁄6), 256QAM (3⁄4), 256QAM (5⁄6), 1024QAM (3⁄4), 1024QAM (5⁄6)
Antenna gain	19 dBi
Polarization	Dual-linear
Beamwidth	Azimuth: 3 dB 14° Elevation: 3 dB 14°
Cross-pol isolation	20 dB
Power	Flashing white: bootup in progress White: not connected to UISP application Blue: connected to UISP application Flashing blue: locate in progress Blue/white: firmware upgrade in progress
Ethernet	Flashing blue: Ethernet traffic detected
GPS	Blue: receiving at least (4) GPS satellite signal