Starting with the first-generation NanoBridge®, Ubiquiti Networks pioneered the all-in-one design for an airMAX® product functioning as a CPE (Customer Premises Equipment). Now Ubiquiti Networks launches the latest generation of CPE, the NanoBeam®
Improved Noise Immunity
Available for the 2.4 and 5 GHz frequency bands, the NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
The Ubiquiti® Research and Development team combined the radio and antenna to create a more efficient and compact CPE. The NanoBeam gets maximum gain out of the smallest footprint.
Providing increased performance from its faster processor and innovative mechanical design at a low cost, the NanoBeam is extremely versatile and cost-effective to deploy.
airMAX Technology Included
Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller.
This time slot method eliminates hidden node collisions and maximizes airtime efficiency. It provides significant performance improvements in latency, throughput, and scalability compared to all other outdoor systems in its class.
Priority is given to voice/video for seamless streaming.
High capacity and scalability.
Capable of high-speed, carrier-class links.
airOS® is an intuitive, versatile, highly developed Ubiquiti firmware technology. It is exceptionally intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture, which enables high -performance, outdoor multi -point networking.
• Protocol Support
• Ubiquiti Channelization
• Spectral Width Adjustment
• ACK Auto-Timing
• AAP Technology
• Multi-Language Support
Integrated on all Ubiquiti M products, airView® provides advanced spectrum analyzer functionality: waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference.
• Waterfall Aggregate energy over time for each frequency.
• Waveform Aggregate energy collected.
• Real-time Energy is shown in real time as a function of frequency.
• Recording Automate airView to record and report results.
airControl® is a powerful and intuitive, web-based server network management application, which allows operators to centrally manage entire networks of Ubiquiti devices.
• Network Map
• Monitor Device Status
• Mass Firmware Upgrade
• Web UI Access
• Manage Groups of Devices
• Task Scheduling
Innovative Mechanical Design
• All-in-one design The NanoBeam provides both the radio and antenna in the smallest possible footprint.
• Quick and easy installation No fasteners are required for pole-mounting, and a single wall fastener (not included) is required for wall-mounting.
• Convenient alignment The NanoBeam pivots on its ball joint for easy aiming.
Compact Form Factor
• Efficient footprint The radio and antenna are combined into a single body that takes up minimal space.
• Versatile mounting The NanoBeam can be mounted in almost any position needed for line of sight.
• Aesthetics The NanoBeam is small enough to blend discreetly into the background at a customer's location.
|Warranty (Repair - Replacement)|
|Dimensions||189 x 189 x 125 mm|
|Power Supply||24V, 0.5A PoE|
|Max. Power Consumption||6 W|
|Operating Frequency||2405 - 2475 MHz|
|Networking Interface||(1) 10/100 Ethernet Port|
|Processor Specs||Atheros MIPS 74Kc, 560 MHz|
|Memory||64 MB DDR2, 8 MB Flash|
|LEDs||(1) Power, (1) LAN, (4) WLAN|
|Signal Strength LEDs||Software-Adjustable to Correspond to Custom RSSI Levels|
|Channel Sizes||5/8/10/20/30/40 MHz|
|Enclosure||Outdoor UV Stabilized Plastic|
|Mounting||Pole-Mount (Kit Included)
|ESD/EMP Protection||Air: ±24 kV
Contact:± 24 kV
|Operating Temperature||-40 to 80°C|
|Operating Humidity||5 to 95% Noncondensing|
|Wireless Approvals||FCC, IC, CE|
|Salt Fog Test||IEC 68-2-11 (ASTM B117),
Equivalent: MIL-STD-810 G Method 509.5
|Vibration Test||IEC 68-2-6|
|Temperature Shock Test||IEC 68-2-14|
|UV Test||IEC 68-2-5 at 40° C, Equivalent: ETS 300 019-1-4|
|Wind-Driven Rain Test||ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5|