Ubiquiti Networks has designed airMAX ac radios with high performance and ease of installation in mind. The Rocket®2AC Prism features both airMAX ac and airPrism technologies for maximum wireless performance in high‑density areas.
Pair the Rocket 2AC Prism with airMAX ac antennas for optimal performance:
• PtP backhaul RocketDish™ ac Antenna
• PtMP links airMAX ac Sector
2.4 GHz Coverage
Deploy the Rocket 2AC Prism anywhere in the world. It delivers complete coverage of the 2.4 GHz spectrum with a single radio. The Rocket 2AC Prism allows for flexibility in configuring channel bandwidths (subject to local country regulations).
Sporting an all-new design for improved usability, airOS® v8 is the revolutionary operating system for Ubiquiti® airMAX ac products.
Powerful Wireless Features
• Access Point PtMP airMAX Mixed Mode
• airMAX ac Protocol Support
• Long-Range Point-to-Point (PtP) Link Mode
• Selectable Channel Width
- PtP: 10/20/40 MHz
- PtMP: 10/20/40 MHz
• Automatic Channel Selection
• Transmit Power Control: Automatic/Manual
• Automatic Distance Selection (ACK Timing)
• Strongest WPA2 Security
• airMagic® Channel Selection Tool
• Dynamic Configuration Changes
• Instant Input Validation
• Redesigned User Interface
• HTML5 Technology
• Optimization for Mobile Devices
• Detailed Device Statistics
• Diagnostic Tools, including Ethernet Cabling Test, RF Diagnostics, and airView® Spectrum Analyzer
Advanced RF Analytics
airMAX ac devices feature a multi‑radio architecture to power a revolutionary RF analytics engine. An independent processor on the PCBA powers a second, dedicated radio, which persistently analyzes the full 2.4 GHz spectrum and every received symbol to provide you with the most advanced RF analytics in the industry. Data from the spectrum analysis and RF performance monitoring is displayed on the Main tab and airView Spectrum Analyzer
The Main tab displays the following RF information:
• Persistent RF Error Vector Magnitude (EVM) constellation diagrams
• Carrier to Interference-plus-Noise Ratio (CINR) histograms
• Signal-to-Noise Ratio (SNR) time series plots
airView allows you to identify noise signatures and plan your networks to minimize noise interference. airView performs the following functions:
• Constantly monitors environmental noise
• Collects energy data points in real‑time spectral views
• Helps optimize channel selection, network design, and wireless performance
airView runs in the background without disabling the wireless link, so there is no disruption to the network.
In airView, there are three spectral views, each of which represents different data.
• Waterfall Aggregate energy collected for each frequency
• Waveform Aggregate energy collected
• Ambient Noise Level Background noise energy shown as a function of frequency
airView provides powerful spectrum analyzer functionality, eliminating the need to rent or purchase additional equipment for conducting site surveys.
Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) airMAX ac protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller.
This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX ac technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class.
Intelligent QoS Priority assigned to voice/video for seamless streaming.
Scalability High capacity and scalability.
Long Distance Capable of high‑speed, carrier-class links.
The next-generation airMAX ac technology boosts the advantages of our proprietary TDMA protocol. Ubiquiti’s airMAX engine with custom IC dramatically improves TDMA latency and network scalability.
The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.
airMAX ac supports high data rates, which require dense modulation: 256QAM – a significant increase from 64QAM, which is used in airMAX.
With their use of proprietary airMAX ac technology, airMAX ac products supports up to 330+ Mbps (maximum 40 MHz channel width) real TCP/IP throughput – up to triple the throughput of standard airMAX products.
To enhance airMAX ac performance, Ubiquiti Networks introduces our patented airPrism technology, which is featured on the Rocket 2AC Prism, model R2AC-PRISM.
High data rates require a high Signal‑to‑Noise Ratio (SNR), which is challenging to achieve, especially in noisy, high‑density areas. Integrated into Ubiquiti’s custom silicon, airPrism technology creates a high SNR by isolating signals within the operating channel and rejecting interference using specialized circuitry, the High‑Selectivity Receiver (HSR).
Depending on the product model and operating mode, available channel widths may include 10, 20, or 40 MHz.
Theoretically APs operate on different channels; however, because of the wider channel bandwidths, there can be overlap in spectrum usage.
airPrism technology removes up to an additional 30+ dB of adjacent channel interference through the active filtering design, so an airMAX ac AP with airPrism technology can provide significantly greater performance than a typical AP.
Facilitates AP Co-Location
Co-location is vital in many scenarios. For example, a WISP may have limited tower space, so it must co‑locate all APs within that allotted footprint.
Shielding and other means can lessen interference but may be impractical.
By deploying airMAX ac APs with airPrism technology, you can co‑locate APs and enhance the overall performance of your wireless network.
|Number of APs||Channel Width|
|Warranty (Repair - Replacement)|
|Dimensions||88 x 40 x 230 mm|
|Power Supply||24V, 0.5A Gigabit PoE|
|Max. Power Consumption||8.5W|
|Power Method||Passive PoE (Pairs 4, 5+; 7, 8 Return)|
|Supported Voltage Range||18-26VDC|
|Operating Frequency||2412 - 2472 MHz|
|Networking Interface||(1) 10/100/1000 Ethernet Port|
|RF Connectors||(2) RP-SMA (Waterproof)
(1) GPS (Waterproof)
|Processor Specs||Atheros MIPS 74Kc, 720 MHz|
|Memory||128 MB DDR2 SDRAM, 16 MB NOR Flash|
|LEDs||Power, LAN, (4) Signal Strength, GPS|
|Signal Strength LEDs||Software-Adjustable to Correspond to Custom RSSI Levels|
|Channel Width Support||10/20/40 MHz|
|Enclosure Characteristics||Die-Cast Aluminum with White Powder Coating|
|ESD/EMP Protection||Air: ± 24 kV, Contact: ± 24 kV|
|Operating Temperature||-40 to 70° C (-40 to 158° F)|
|Operating Humidity||5 to 95% Noncondensing|
|Wireless Approvals||FCC, IC, CE|
|Shock and Vibration||ETSI300-019-1.4|
|Modes||Access Point, Station|
|Services||Web Server, SNMP, SSH Server, Telnet, Ping Watchdog,
DHCP, NAT, Bridging, Routing
|Utilities||airMagic, airView, Antenna Alignment Tool,
Discovery Utility, Site Survey, Ping, Traceroute, Speed Test
|Distance Adjustment||Dynamic Ack and Ackless Mode|
|Power Adjustment||Software Adjustable UI|
|Security||WPA2 AES Onl|
|QoS||Supports Packet Level Classification WMM and
User Customer Level: High/Medium/Low
|Statistical Reporting||Uptime, Packet Errors, Data Rates, Wireless Distance,
Ethernet Link Rate
|Other||Remote Reset Support Software Enabled/Disabled,
VLAN Support, 256QAM, GPS, TX Filter
|Ubiquiti Specific Features||10 MHz Channels, airMAX ac Mode, Traffic Shaping
with Burst Support, Discovery Protocol, Frequency
Band Offset, Ackless Mode