MaxLink PSBT-19-16P-250 PoE switch, 18x LAN/16x PoE 250m, 802.3af/at/bt

MaxLink PSBT-19-16P-250 is a 24-port 10/100Mbps PoE switch with two more Gigabit LAN ports. Only one is a LAN/SFP combo. Automatically detects and powers device supporting PoE standard 802.3af/at (max.30 W/port) on ports 1 to 16, on port 1 and 2 it even supports PoE standard 802.3bt (60 W). Ports 17 and 18 serve as uplinks and do not support PoE. The total budget for powering connected devices is 200 W using an internal power supply. The switch automatically balances power for each port according to the device's consumption. The switch can be mounted in a 19" rack thanks to the included accessories. Ports 1 and 2 also support the 802.3bt standard, where output power up to 60 W is available for the connected devices! Switches are now newly equipped with a Watchdog feature. If Ethernet link has not been detected for about 1 minute and power consumption is active, the power supply will be interrupted and the connected device will be restarted.

Manual mode switch
• Normal "N": The switch supplies power to the device at a distance of max. 100 m. The throughput of the switch per port is 10/100 Mbps.
• VLAN: Ports are logically separated from each other, in this mode you can prevent unwanted broadcast storms. The switch powers the device up to 100m and the throughput per port is 10/100 Mbps.
• 250 m: The switch powers devices up to 250 m with a reduced throughput of 10 Mbps per port.

With this switch, you can power a wide range of IP cameras, VoIP phones, WiFi APs and other devices that support the 802.3af/at standard.