- PAPANIKOLI 1A – 1077 – NICOSIA – CYPRUS
- 0035722000125
- This email address is being protected from spambots. You need JavaScript enabled to view it.
MaxLink PSAT-19-16P-250 Series PoE unmanaged switch automatically detect and supply power according to IEEE 802.3af/at compliant Powered Devices (PDs), it has 16x10/100Mbps, 2x10/100/1000Mbps and 1x10/100/1000Mbps SFP, Auto-Negotiation ports and 16 of them does support PoE (Power over Ethernet).
PoE switch supports powering devices up to 250m while transmit bandwidth of RJ45 PoE ports drops to 10Mbps. Ports 17/18/19 are just uplink ports without any PoE support. It supports also energyefficient technology to save power consumption on ports without any use.
Switch supports 2 different working modes which can be set:
1. "N" normal: Switch works as normal PoE switch and it can power devices up to 100m. The throughput speed is 10/100Mbps per port.
2. 250m: Switch can power devices up to 250m while the speed drops to 10Mbps per port.
It has to be switched manually on the switch front panel in to “N or 250m” mode. There is no need to worry about the damaging of standard POE or Non-POE devices, the power will be switched off when the POE device does not support active PoE standard.
Warranty (Repair - Replacement) | |
24 months |
Specifications | |
Network Port | 16x 10/100Mbps PoE RJ45 port (port 1~port 16) 802.3af/at 2x 10/100/1000 Mbps Non-POE RJ45 port (port 17, 18) 1x 10/100/1000 Mbps Non-POE SFP port (cisco comp.) |
Transfer Rate | 100Mbps full Duplex, 10 or 100Mbps Half Duplex, 1000Mbit Full duplex on uplink ports Network interface: 10BASE-T or 100BASE-TX Ethernet RJ-45, 1000BASE-T |
Performance | bandwidth: 2Gbps (no block) network delay (100 to 100Mbps): maximum 20 μs (using 64 byte packet) MAC address capacity: 8K Frames filter and transfer rate: -10M port maximum 14,800pps -100M port maximum 148,800pps -1000M port maximum 1488,00pps |
Network protocol and standard | IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x Flow Control IEEE 802.3af/at Power over Ethernet |
POE pin | 1/2(+), 3/6(-); or 4/5(+), 7/8(-); |
LEDs indicator | Power - PWR Link/PoE 250M/N |
Power | Total power: 150W (All PoE port, port 1~port 16) single port max. 30W Input power: 150W; 230V AC |
Dimensions | Size (LxWxH): 285mm x 220mm x 45mm Weight: 1.2 kg |
Environment | Operating Temperature: 0°C~40°C (32°F~104°F) Storage Temperature: -30°C~70°C (-104°F~158°F) Working Humidity: 10%~90% (Non-condensing) Storage Temperature: 5%~90% (Non-condensing) |
EMC | CE Class B FCC Part 15, Class B VCCI Class B, RoHS |
Package Contents | Device Rackmount ears to 19" rack Power cord |